LDMOS 2-stage power MMIC

The BLM7G1822S-80PB(G) is a dual section, 2-stage power MMIC using Ampleon’s state of the art GEN7 LDMOS technology. This multiband device is perfectly suited as general purpose driver or small cell final in the frequency range from 1805 MHz to 2170 MHz. Available in gull wing or straight lead outline.

Features and benefits

  • Designed for broadband operation (frequency 1805 MHz to 2170 MHz)
  • High section-to-section isolation enabling multiple combinations
  • Integrated temperature compensated bias
  • Biasing of individual stages is externally accessible
  • Integrated ESD protection
  • Excellent thermal stability
  • High power gain
  • On-chip matching for ease of use
  • For RoHS compliance see the product details on the Ampleon website

Applications

  • RF power MMIC for W-CDMA base stations in the 1805 MHz to 2170 MHz frequency range. Possible circuit topologies are the following:
    • Dual section or single ended
    • Doherty
    • Quadrature combined
    • Push-pull

Downloads

Datasheet
All application notes
All documentation

All documents

Design tool

RF Power Lifetime Calculator

Transistor:
BLM7G1822S-80PB

LDMOS 2-stage power MMIC

°C

Parametrics

Symbol Parameter Conditions Min Typ/Nom Max Unit
frange frequency range 1805 2170 MHz
PL(1dB) nominal output power at 1 dB gain compression 80 W
Test signal: 1-c W-CDMA
Gp power gain VDS = 28 V; f = 2167.5 MHz; IDq2 = 240 mA (final stage) 26.5 28 29.5 dB
RLin input return loss VDS = 28 V; f = 2167.5 MHz; IDq2 = 240 mA (final stage) -20 -10 dB
ηD drain efficiency VDS = 28 V; f = 2167.5 MHz; IDq2 = 240 mA (final stage) 18 24 %
ACPR5M adjacent channel power ratio (5 MHz) VDS = 28 V; f = 2167.5 Hz; IDq2 = 240 mA (final stage) -36 -28.5 dBc
PARo output peak-to-average ratio f = 2167.5 MHz, IDq2 = 240 mA (final stage) 4.6 7 dB

Package / Packing

Type number Package Outline version Reflow-/Wave
soldering
Packing Product status Marking Orderable part number,
(Ordering code (12NC))
BLM7G1822S-80PB SOT1211-3
(SOT1211-3)
sot1211-3_po.pdf Reel 13" Q1/T1 in Drypack Active Standard Marking BLM7G1822S-80PBY
(9340 695 77518)

Pinning info

Pin Symbol Description Simplified outline Graphic symbol
1 VDS(A1) drain-source voltage of stage A1
2 VGS(A2) gate source voltage of stage A2
3 VGS(A1) gate-source voltage of stage A1
4 RF_IN_A RF input section A
5 n.c. not connected
6 n.c. not connected
7 n.c. not connected
8 n.c. not connected
9 n.c. not connected
10 n.c. not connected
11 RF_IN_B RF input section B
12 VGS(B1) gate-source voltage of stage B1
13 VGS(B2) gate-source voltage of stage B2
14 VDS(B1) drain-source voltage of stage B1
15 RF_OUT_B/VDS(B2) RF output section B / drain source voltage of stage B2
16 RF_OUT_A/VDS(A2) RF output section A / drain source voltage of stage A2
flange GND RF ground

Quality

Type number Orderable part number Chemical content RoHS / RHF Leadfree conversion date MSL MSL LF
Quality and reliability disclaimer

Ordering & availability

Type number Ordering code (12NC) Orderable part number Distributor Buy online Samples
BLM7G1822S-80PB 9340 695 77518 BLM7G1822S-80PBY RFMW Buy Not available
DigiKey Buy

Design support

Title Type Date
PCB Design BLM7G1822S-80PB(G) (Data sheet) Design support 2018-10-17